The Aeria Evo AL is an update of our proven Aeria bar. We have evolved the fit range of the bar with New Evo brackets, Ergo armrest and 35a extensions. The new brackets add the ability to tilt the entire assembly, as well as letting the armrest go much narrower than the first generation design. The new Ergo armrest increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options.
- Base Bar: Aeria Aluminum
UCI Compliant 3:1, aerodynamic 6061-T6 Hydroformed aluminum wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control.
- Bracket: Evo
The Evo bracket allows you to upgrade an existing Aeria bar with a massively increased fit range as well as builtin tilt. It is compatible with the existing spacer kit and armrests.
- Armrest: Ergo
Ergo is the core of our new family of fi t and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The pads are available in two thicknesses - 5mm and 10mm - allowing riders to tune the fit and feel to their own preference. The Ergo is compatible with all current aerobars and earlier models that used the F19, F22, F35 and F40 armrests.
- Extension: 35a
The new range of extensions has evolved from our well proven T-Series. They have been designed to offer distinct fi t options. We have also adopted a new naming system where by the name gives the angle and material of the extension. Thus the 35a is a 35° bend in aluminum. The 35a extensions offer a 35deg ski bend shape. They are 400mm long to allow a wide range of riders to fit. The cable routing is designed to exit from the rear of the extension.
- Basebar Width: 42cm (Center-to-Center)
- Basebar: 6061-T6 aluminum
- Pursuit Reach: 157.5mm (center to tip)
- Bracket: Aeria Evo (6061-T6 aluminum)
- Armrest: Ergo
- Armrest Stack: 56mm to 80mm (5mm Increments): Risers / Bolts sold separately
- Armrest Offset: -66mm to 1.5mm (7.5mm Increments)
- Armrest Width: 100mm to 266mm (18.5mm Increments)
- Extension Length Adjustment: 40mm
- Extension Length: 400mm
- Extension Height: 80mm
- Extension Angle: 35°
- Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable
- Armrest Rotation: 7°
- Bracket Tilt Adjustment: 0-10°
- Weight: 1012g
|31.8mm / Black / 42cm||723660008635||RHARAEVOAL422||32202|